Club 80-90 Forums

Great news.
I fixed mine with fresh wiring and connections yesterday.

http://www.gowesty.com/library_article.php?id=810" onclick="window.open(this.href);return false;
you might find this helpful
I am currently having this, im going to put on a new oil pressure switch tomorrow and see if it stops.

Defiantly has a high pressure oil switch, and if I take the connector and ground it on spade next to distribiter red thingy the buzzer is silent. Im sure that its either the switch needs replacing or just needs cleaning up as dirty. But because I cant get to clean it without working my way in there ...

so does two oil switched mean a newer engine?
Also It must have been modified years ago because the pump seal had gone and looked fairly old which is why I had to replace it

And there is second switch because it is winding me up with buzzer at the moment, have just got a new one of them of just kampers I need to fit.

Shame to change it after all the effort last month to fit new pump!

Great thankyou

Your right thankyou!
Just checked and yes plastic housing with red yellow wire going in to rear. Well I have the other type of water pump handy already... I didn't send it back. And there is thermostat in the metal housing, and presumably the plastic housing.

Ah thankyou, sorry I glanced through that.
Getting the torch...... Many thanks for your help...where do you reside?

http://s1246.photobucket.com/user/Atoom ... sort=3&o=3" onclick="window.open(this.href);return false;
Actually this was the best I got, sorry!

I have another photo of bay but how to make it smaller in size to upload?
Im in Sway

Where would the plastic housing be?
there is one switch under engine and one switch below pump that sets buzzer off when wire is not on it
Also when yiou say cut in do you mean the wiring.many thanks

In regards to water pump I ordered a water pump from europarts in relation to my reg number but when it came it was the wrong one, I had the order an older pre 85 one from discount centre There is a thermostat in the metal housing because I thought I would test it in boiling water when it was off ju...

http://s1246.photobucket.com/user/Atoomer151/library/petrol%20t25%20engine%20bay?sort=3&page=1" onclick="window.open(this.href);return false; That's for bearing with me. Here are some pictures I have taken but in the dark. The new shiny sender on the left of themo stat housing is the o...

will look into carb heater and will get a pic up tomorrow eve

Thanks for reply, it is a early model metal housing at rear of vehicle. There is a sender on left side of housing with no wire and none hanging round near by. there is a brown wire that goes down below water pump to oil buzzer pressure switchy thingy ( that has a lose connection im trying to sort......

Great thanks for reply, I havn't been able to find info on it so if not needed because of no fuel injection that gives me something to go on. I havnt noticed the other wires will look tomorrow. Didn't notice them when changing water pump I only noticed oil pressure wires. I have now found a random t...