Club 80-90 Forums

Check for a lip on the discs, and chamfer the pads it they are wearing unevenly on the edges, and make sure they are 'free' in the carriers, clean and regrease the ends aswell, you can rub them down a bit to make them fit nicely

No real reason, everything else is power flex , just though it would look pretty lol

Busy ready for MM's slider panel

Black smoke is normally over fueling, sounds like a pump timing issue, req'd the plunger lift setting up,(DTI in the back of the pump at tdc and measure ) also depend how you drive? If your never in to boost and if it's over fueling the exhaust will soot and as soon as you give it a bit extra out co...

Ohps 2.1 DJ petrol manual, have a powerflex gearbox mount

Hi all
Any body know of a supplier of some decent engine mounts, they are just a pain to change I wanted to put in some decent ones
Ta in advance

Brakes painted and ready for new ball joints etc

I think there are a few more bits than that, bush in the support on the gearbox and a joint halfway

Check the shockers new bushes my be 'fatter' and causing the noise, I know its a pain but slacken all the bolts that you have had off or loosened then tighten when the weight is on its wheels in there 'normal' position, if they were tightened while jacked up the bushes will be slightly preloaded tor...

Freshly powder coated and new powerflex bushes, love them or hate them they do look good!!

Anybody know why the pics have disappeared?

MM
Are those slider panels made to match the full height arches? And how much?

Shows how little I know, uk van as far as I'm aware will check the vin and work it out

Have been meaning to start a post about the 'freshening' of my bus for ages but it's been ongoing for a while, being a tech I'm too busy fixing other peoples cars than finding time for Jessabelle! The viscous cycle! The engine is out as it had a ring problem on cyl 1. Her body isn't that bad compare...

Air leak, metering unit faulty?