Page 1 of 1

where do the wires go?

Posted: 29 Mar 2012, 17:24
by spookyrooky
ive finally got round to fitting an engine 2 years down the line on my 1.9 dj engine, but im having a memory lapse to where the wires go, ive got black and brown to a water sensor,
red wire from the heater element to the red wire in the loom,
yellow wire to a small sensor on the thermostat housing,
brown wire from the dizzy to the left hand side of the solex carb connected to a black which then goes to an earth point on the front of the solex carb,

BUT ive got a terminal on the right hand side of the carb? where does this go???


PS if the wiring is wrong, please tell me :)


thank you.

Re: where do the wires go?

Posted: 29 Mar 2012, 17:34
by spookyrooky
ps, how do you upload pictures?

Re: where do the wires go?

Posted: 30 Mar 2012, 06:57
by Titus A Duxass
spookyrooky wrote:ps, how do you upload pictures?

In the Wiki - https://club8090.co.uk/wiki/Mi ... g_pictures

Re: where do the wires go?

Posted: 30 Mar 2012, 07:21
by ajsimmo
Really need a picture to suss this one out, as a 1.9 dj with a solex carb is a strange hybrid indeed! :D

Sounds to me like it's probably a DF.
BTW black wires are usually live 12V feed on a VW engine, brown is earth.