Club 80-90 Forums

just been bleeding my brakes and came to the last one and the bleed screw sheared off.what size bleed screws does my t25 take and where can i get one and how can i get the rest of this bleed screw out,cheers dave

Same happened to me, you might be lucky and get it out using a stud extractor. There about £5 from local motor factor. Size wise i'm sure thats in the wiki

Jonno

front or rear?

If it's the rear I would just change the cylinders - that's what I did as they tend to be at the end of their lives anyway unless they have already been changed.

yes its the rear,are these easy to do anything to look out for,cheers dave

It depends on the condition of the brake pipe really - it is a good excuse to get everything in good order in there - springs, shoes etc.
Have a read of the Wiki https://club8090.co.uk/wiki/Br ... _servicing

£5 for the bleed nipple! Wow I can get need cylinders ( rear) for less than that, might buy a load and sell on the bleed nipples!

I thought that was the price of the stud extractor.

In an emergency you can get away with bleeding via the pipe nut

PlusGas is your friend here.