Club 80-90 Forums

Could someone assist me, I have got a 1982 T25 air cooled van, it's got a zig cf6 fitted but has no 240v sockets in the van. I would like to fit a couple under my zig unit for when I am hooked up in a campsite with electrics. The van does have an electric hook up fitted. But not sure what to wire the sockets too.
Please assist if you can.
Thanks
Pete

I take it you have a Devon and it is in the wardrobe? Do you have a fuse box ( mine didn't )? Does the feed for the zig disappear off in a small white flex?

It's a Devon but has had a bispoke interior put in. Zigs in the cupboard (normal area)
And yes the white lead disappears down the back of the cupboard.
Pete

Not sure if it has a fuse box, haven't fount one yet.

You aint got one then and you need one really. Especially an rcd. There is a brilliant thread on here on how to wire it all in. I will find it for you.

Here it is. Ignore what i said on it as i was wrong. The mcb's should be double pole really but I would not worry about it

https://club8090.co.uk/forum/viewtopic.php?f=39&t=93057" onclick="window.open(this.href);return false;

Is your hook up in the sliding door cover?

This will also help, note the 5a Zig supply. it is a cf8 but yours is wired the same.

https://club8090.co.uk/wiki/Ca ... _Zig_Units" onclick="window.open(this.href);return false;

I know nothing about your Zig unit but as your van has never had a mains connection I'm guessing this hasn't got a built in charger?
As far as the mains goes you are going to need a consumer unit

http://www.ebay.co.uk/itm/CARAVAN-M-HOM ... 3370449993" onclick="window.open(this.href);return false;

http://www.ebay.co.uk/itm/Caravan-motor ... 2a17299e11" onclick="window.open(this.href);return false;

A mains hookup socket

http://www.ebay.co.uk/itm/MAINS-230V-16 ... 4cf26185fa" onclick="window.open(this.href);return false;

Some flexible mains cable

http://www.ebay.co.uk/itm/1m-3-core-mai ... 255b832213" onclick="window.open(this.href);return false;

Cable clips and ties, grommets if cable goes through rough chassis holes.

Martin

Cheers Martin, I do have a mains hook up in the none Sliding door side, I'll follow te wired to check for an RCD unit, if it doesnt I'll follow the thread which looks really helpfull.
Thanks
Pete