Page 1 of 1
mercedes clk 17 inch alloys
Posted: 10 Jan 2012, 12:33
by dave lfc
hi just got some mercedes clk alloy wheels with an 8j et 30 stamped on the wheels.now i have just found out the lug holes on the wheels only take 12mm bolts and the t25 takes 14mm, do i need to drill these out,is this an easy job any help/tips would be gratefull,cheers dave
Re: mercedes clk 17 inch alloys
Posted: 10 Jan 2012, 20:02
by kevtherev
tyres off and I would take them to my local engineering shop.
Or using a pillar drill and the wheel secured with the bit at high speed as it will snag. Accuracy is very important, as you can imagine.
what about the centers?
Re: mercedes clk 17 inch alloys
Posted: 11 Jan 2012, 07:52
by dave lfc
centers are ok 66.6mm,cheers dave