Page 1 of 1
Fitting a kick panel under the back seat.
Posted: 24 Dec 2011, 10:57
by Zebedee
My caravelle doesn't have a kickpanel under the back seat so i'm going to make one from ply.
How do they ususally attach to the seat frame or are they just a snug push fit?
Re: Fitting a kick panel under the back seat.
Posted: 24 Dec 2011, 11:55
by Mickyfin
There are two metal retainers that clip onto the two seat legs. Similar to the metal clip found on the lower steering column plastic shroud that clips to the steering column itself.
Re: Fitting a kick panel under the back seat.
Posted: 27 Dec 2011, 11:19
by Zebedee
Cheers. I assume that would be attached to the kickpanel?
I think i've got some of these spring clips kicking about so i'll see if i can use them.
Re: Fitting a kick panel under the back seat.
Posted: 27 Dec 2011, 12:54
by Mickyfin
Those are the ones.
Re: Fitting a kick panel under the back seat.
Posted: 19 Feb 2012, 18:04
by Zebedee
Finally got my kickpanel trimmed and fitted.
Not too bad considering it is made of scrap.