Page 1 of 1
Flue on 3 way fridge
Posted: 05 Jul 2011, 16:13
by miggs
Right dilema
I have a twin slider and im putting in a camping interior and a 3 way fridge now can i vent the fridge with some metal flexible pipe to the rear quarter so i dont have to drill the door
And also do i have to place a hole in the floor behind the rear of the fridge to vent it if the gas leaks
cheers
Re: Flue on 3 way fridge
Posted: 05 Jul 2011, 16:32
by Oldiebut goodie
No.
Yes.
Re: Flue on 3 way fridge
Posted: 05 Jul 2011, 16:47
by miggs
so if no what are the options on the flue
Re: Flue on 3 way fridge
Posted: 05 Jul 2011, 18:56
by Plasticman
If you knoww your way around then it can be done very discreetly through the B post, still need the gas drop out hole though
mike
Re: Flue on 3 way fridge
Posted: 05 Jul 2011, 19:30
by miggs
cheers mick do you have any pics of what you mean
Re: Flue on 3 way fridge
Posted: 05 Jul 2011, 19:48
by Plasticman
No it was on a van i done a few years ago, but had the fridge in a small unit with hob and sink on top and this was on the n/s twin slider van) and I routed the flue through the B post and fitted the vertical external electrolux vent cover thingy it fitted in the upper swage and really looked like it was meant to be,I did make an adaptor so that the part that was inside /going through the b post was permanent fixed in and the flexi metal fridge flue inseted into this, worked perfect, then if unit wasnt wanted (works type van stuff etc then the unit would unclip of the floor and away,
mike
Re: Flue on 3 way fridge
Posted: 12 Jul 2011, 18:39
by miggs
i have got myself a metal flue cover but it seems to be wider than the b pillar did you modify the cover??
Re: Flue on 3 way fridge
Posted: 12 Jul 2011, 18:47
by Plasticman
I will post you a picky up after tea
M
Re: Flue on 3 way fridge
Posted: 12 Jul 2011, 18:50
by lloydy
i look forward to the pics, could be very interesting.........

Re: Flue on 3 way fridge
Posted: 12 Jul 2011, 19:32
by Plasticman
I have the picks on 35mm, yes real wet film , trouble is there are thousands from past years and no idea where to start looking but its dead easy to do,
anyhow this is a picky of a slightly cut plaggy electrolux cover mounted on its side, there is a top cover on the flue outlet to prevent water ingress.

you could easy mount this on the B post or make a custom ally one up, which is what I would do next time.
mike