Club 80-90 Forums

Anyone know the cheapest place to buy this please?
cheers
G

http://www.shcofields.co.uk" onclick="window.open(this.href);return false; but in fairness all the aftermarket supply of this part is pants....according to those that have used them.

You may be better off plating any holes, cutting off the rubber lumps on the step rubber and bonding it on with no more nails

Ok cheers mate
G

I second cruz
M

clives repair on the wiki
https://club8090.co.uk/wiki/Ar ... -_Cab_step" onclick="window.open(this.href);return false;

Hi mate , how desperate for the step are you?

Ive brought one but dont think im going to use it now (going to put in a plate instead, cause they are as bad as everybody says).

If you can hang on for a couple of weeks you can have it for a tenner as theres no way I can charge what I payed for it .

James

fidget wrote:Hi mate , how desperate for the step are you?

Ive brought one but dont think im going to use it now (going to put in a plate instead, cause they are as bad as everybody says).

If you can hang on for a couple of weeks you can have it for a tenner as theres no way I can charge what I payed for it .

James

Cheers mate, could do with it asap to be honest. I dont need all the step i just need to cut the front off it and the part of the wheel arch. Was going to try and do it this weekend ready for the camperjam.
Cheers
G

Dont bother with a repair panel if you can help it (sorry fidget not trying to do you out of a sale )
Try and fab something up. They are really poor.

I've done both mine, bought from JK, total pants as every body says. I just cut out the rot and cut down the new panels to what i needed rather than fart about trying to make the complete part fit

Dave

DavidPallister wrote:I've done both mine, bought from JK, total pants as every body says. I just cut out the rot and cut down the new panels to what i needed rather than fart about trying to make the complete part fit

Dave

check you spelling fella, it should read complete prat fit
M

I had Schofield's ones and did both sides on my van, now I dunno if its coz I'm a mechanic by trade but with some light fettling they fit fine! Think some need to spend a bit more time trying before dismissing them!

jamesc76 wrote:I had Schofield's ones and did both sides on my van, now I dunno if its coz I'm a mechanic by trade but with some light fettling they fit fine! Think some need to spend a bit more time trying before dismissing them!

Aiming this at anyone in particular or is this a blanket accusation of inability.

James

The last time I saw one it looked as sturdy as a bean can

fidget wrote:

jamesc76 wrote:I had Schofield's ones and did both sides on my van, now I dunno if its coz I'm a mechanic by trade but with some light fettling they fit fine! Think some need to spend a bit more time trying before dismissing them!

Aiming this at anyone in particular or is this a blanket accusation of inability.

James

Your second statement really!
You have to remember there pattern parts not original!

There good, if they weren't i would have rolled and hammered out my own from scratch!