Club 80-90 Forums

My suspension hangers are, well.....hangin

Inner trailing arm mounts are perfect but the outers have succumbed to too much tin worm and are now a little thin for my liking. Ive tried a search for info but couldn't seem to find anything so a post to ask the question-
Anyone had any experience of changing them?
Does a prefab panel exist?
thanks in advance

just changed one on a customers syncro, couldn`t get a panel so ended up making one out of 4mm steel. you`ll need to jig it up before you strip the rotton one out but wasn`t that bad to do once you got stuck in.

..lee.. wrote:just changed one on a customers syncro, couldn`t get a panel so ended up making one out of 4mm steel. you`ll need to jig it up before you strip the rotton one out but wasn`t that bad to do once you got stuck in.

Nice 1 Lee fabricate it is then ta!

they may still be available from classic in germany, I can ask if reqd.

My offside outer one has seen better days too, even if the mot man considered it ok (no advisories)
On the jobs list...