How much time
Posted: 27 Apr 2006, 18:50
To change over a starter motor ie mechanic doing it? 2.0ltr petrol
Club 80-90 Forums
For owners and lovers of VW T25 (T3) Vans
https://club8090.co.uk/forum/
How much time
Page 1 of 1
Posted: 27 Apr 2006, 18:58
probably 20 miniutes
Posted: 27 Apr 2006, 19:00
blimey, thats good, just working out my timings for tomorrow!!
Posted: 27 Apr 2006, 22:21
aircold? double that! tinware!
Posted: 28 Apr 2006, 07:42
2.o ltr a/c -- first time, with no knowledge and only haynes to go by...nearly an hour...bit lots of pondering time, trying to get wheel off time...working out what bolts went where time.... 
7 or 8th time (hubby now NOT imporessed with starting problem
) off, bush out, new bush in (the fiddly bits), starter on, about 1/2 hour.
Sorry Mocki, can't remember removing tinware to change starter...perhaps we did sommat wrong, or I have some missing!
Emma
7 or 8th time (hubby now NOT imporessed with starting problem
) off, bush out, new bush in (the fiddly bits), starter on, about 1/2 hour.Sorry Mocki, can't remember removing tinware to change starter...perhaps we did sommat wrong, or I have some missing!
Emma
Posted: 30 Apr 2006, 19:36
Access to a hoist.
Lift the rear hatch, disconnect battery, 2 main nuts, 1 electric connection nut, pull off solenoid wire, remove starter, check bush in casing, fit starter and wires ect, refit hatch. No more then half an hour if no faulty bush found.
Double for tinware....why?
Tex Ritter
Lift the rear hatch, disconnect battery, 2 main nuts, 1 electric connection nut, pull off solenoid wire, remove starter, check bush in casing, fit starter and wires ect, refit hatch. No more then half an hour if no faulty bush found.
Double for tinware....why?
Tex Ritter