Page 1 of 2
Propshaft parts, BFGs and clutch pipes!
Posted: 17 Feb 2010, 17:38
by Simon Baxter
Okay.
Finally remembered to check these propshaft rubber couplings fit the T3 prop, they do.
Not got loads, more on order though.
Click
Also, Aidan came here earlier, he asked me to price up some tyres for him, he said it was a decent price so I thought I would pass it on.
BFG 215 75 15 T/A KM2, the new pattern.
All in, new valve, balanced, fitted, old tyres disposed of - £101.50 each plus VAT, so £100 plus VAT.
May take over a week to get, we have a tyre machine here so all done in house, we even stock those dumpy valves for the 16" rims.
Re: Propshaft parts, BFGs
Posted: 17 Feb 2010, 17:40
by Simon Baxter
Oh, and I got proper syncro front inner CV boots aswell, on the webshop.
Dunno if I said or not, that much new stuff going on I've forgotten where I'm up to!
Anyone want a job?!
Re: Propshaft parts, BFGs
Posted: 17 Feb 2010, 18:33
by toomanytoys
Simon Baxter wrote:
Anyone want a job?!
YES
Re: Propshaft parts, BFGs
Posted: 17 Feb 2010, 20:08
by guzzi
Could you give me a good price for 215 70 16s sent up to the Nutz for me?
Cheapest so far is about the £115-120 mark.....
Re: Propshaft parts, BFGs
Posted: 17 Feb 2010, 21:57
by Simon Baxter
toomanytoys wrote:Simon Baxter wrote:
Anyone want a job?!
YES
Think I may have just secured an employee via a couple of texts....
Re: Propshaft parts, BFGs
Posted: 17 Feb 2010, 22:25
by Simon Baxter
Position filled.
Onwards and upwards..
Re: Propshaft parts, BFGs
Posted: 18 Feb 2010, 01:22
by tencentlife
A match made in heaven. It's so sweet when people find each other.
Re: Propshaft parts, BFGs
Posted: 18 Feb 2010, 02:09
by jebiga41
Anyone want a job?!
Was very tempted vans are a lot easier to fix than deliquent teenagers
Re: Propshaft parts, BFGs
Posted: 18 Feb 2010, 12:27
by syncrosimon
Simon Baxter wrote:Position filled.
Onwards and upwards..
Loadsa Simon's, brilliant.
Re: Propshaft parts, BFGs
Posted: 18 Feb 2010, 12:36
by John Potter
jebiga41 wrote:was very tempted vans are a lot easier to fix than deliquent teenagers
Same tools work as well - big hammer, bit of scaffold bar, etc
Re: Propshaft parts, BFGs
Posted: 18 Feb 2010, 12:42
by Simon Baxter
syncrosimon wrote:Simon Baxter wrote:Position filled.
Onwards and upwards..
Loadsa Simon's, brilliant.
Wrong end of stick, not TMT!
Re: Propshaft parts, BFGs
Posted: 18 Feb 2010, 18:32
by toomanytoys
Simon Baxter wrote:syncrosimon wrote:Simon Baxter wrote:Position filled.
Onwards and upwards..
Loadsa Simon's, brilliant.
Wrong end of stick, not TMT!
Unfortunatly not me..........
Re: Propshaft parts, BFGs
Posted: 18 Feb 2010, 18:34
by guzzi
Yes, yes. But what about my tires?
Re: Propshaft parts, BFGs and clutch pipes!
Posted: 19 Feb 2010, 15:25
by Simon Baxter
Had a syncro petrol and a syncro Diesel here so I've measured up and commisioned the flexible clutch pipes.
Petrol - to replace the rubber one, 2 bulkhead fittings, stainless braided teflon hose - £44.01 plus the dreaded.
Diesel - to replace the long clear plastic one, again stainless braided teflon - £41.33 plus the dreaded.
I have the Diesel ones in, Petrol ones will follow on the next order from the supplier, Diesel one was easier as it's just a early 2WD one but longer!
Tyres - ring or mail.
Re: Propshaft parts, BFGs and clutch pipes!
Posted: 19 Feb 2010, 17:10
by toomanytoys
Nice..
But my late petrol syncro has a clear plastic one...