Topics required to be put in the T25 Tech Wikipedia
Moderators: User administrators, Moderators
Forum rules
Technical questions & answers only. Please try to search the Wiki or Tech Archive first.
Technical questions & answers only. Please try to search the Wiki or Tech Archive first.
-
- Trader
- Posts: 16384
- Joined: 08 Jun 2009, 09:51
- 80-90 Mem No: 6908
- Location: Surrey Syncronaut #156
- Contact:
Re: Topics required to be put in the T25 Tech Wikipedia
Sort-of-useful for the engineers and anoraks out there (me on both counts):
An article on T3's in a wind tunnel and aerodynamic offshoots. I haven't found this info in the wiki just yet but if it's there then it's well hidden!
http://www.thesamba.com/vw/forum/viewto ... ght=visual" onclick="window.open(this.href);return false;
Can we just copy the pic and skip the blahblah, other than the useful bits?
An article on T3's in a wind tunnel and aerodynamic offshoots. I haven't found this info in the wiki just yet but if it's there then it's well hidden!
http://www.thesamba.com/vw/forum/viewto ... ght=visual" onclick="window.open(this.href);return false;
Can we just copy the pic and skip the blahblah, other than the useful bits?
- Titus A Duxass
- Registered user
- Posts: 5778
- Joined: 24 Nov 2007, 08:22
- 80-90 Mem No: 4475
- Location: Cologne
Re: Topics required to be put in the T25 Tech Wikipedia
Do we need a Brake Disc replacment How-To?
Mine were replaced the other week and I have a shed load of photos.
I could put together a How-To (with some caveats).
Mine were replaced the other week and I have a shed load of photos.
I could put together a How-To (with some caveats).
VW T3 GTi Camper 2,0l
Re: Topics required to be put in the T25 Tech Wikipedia
Ahem! This is really for topics that already exist to be transferred to Wiki or for material supplied (> by you <) to be uploaded into the Wiki...Syncro fuel sender please. I'm sick of running out of petrol on red-routes
Unless there is something on this already somewhere?
I could do a bit for Syncros, no idea about the tin-tanked variety though
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
Re: Topics required to be put in the T25 Tech Wikipedia
Can we get this post I made on upgrading round headlights to square added to the wiki please?
Someone somewhere has the lottery funds to buy all the square lights off ebay so it may be useful to someone
http://forum.club8090.co.uk/viewtopic.p ... 6#p7428246" onclick="window.open(this.href);return false;
There are attached images to go with the write-up too
Someone somewhere has the lottery funds to buy all the square lights off ebay so it may be useful to someone
http://forum.club8090.co.uk/viewtopic.p ... 6#p7428246" onclick="window.open(this.href);return false;
There are attached images to go with the write-up too
-
- Registered user
- Posts: 2673
- Joined: 03 Apr 2007, 12:54
- 80-90 Mem No: 8386
- Location: Nottingham
Re: Topics required to be put in the T25 Tech Wikipedia
Alternative steering wheel thread.....good for those with power steering otherwise the steering will be far too heavy.
Down sides are the smaller wheel does partially restrict the speedo view but they do look cool and function well with the mod as described
Details of the popular MK1 Golf GTI wheel and raising switch gear to get the self cancel to work.
See:
http://forum.club8090.co.uk/viewtopic.php?f=42&t=86581" onclick="window.open(this.href);return false;
Arh........looks like my pics have already been used
Martin
Down sides are the smaller wheel does partially restrict the speedo view but they do look cool and function well with the mod as described
Details of the popular MK1 Golf GTI wheel and raising switch gear to get the self cancel to work.
See:
http://forum.club8090.co.uk/viewtopic.php?f=42&t=86581" onclick="window.open(this.href);return false;
Arh........looks like my pics have already been used
Martin
1989 California 2.1MV
Re: Topics required to be put in the T25 Tech Wikipedia
Yes, those are good pics and a very good guide - to be put in the Wiki then
but I think you have misquoted yourself there somehow? What are you sayimg may be making the steering too heavy, not changing the steering wheel to a smaller one ?
Alternative steering wheel thread.....good for those with power steering otherwise the steering will be far too heavy.
but I think you have misquoted yourself there somehow? What are you sayimg may be making the steering too heavy, not changing the steering wheel to a smaller one ?
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
-
- Registered user
- Posts: 314
- Joined: 31 Dec 2010, 22:00
- 80-90 Mem No: 9111
- Location: Dover, Kent
Re: Topics required to be put in the T25 Tech Wikipedia
Not sure if this is Wiki'able as it is a long thread, but this is my wbx water seal/gasket and head rebuild. If you do want to use it and need some help abbreviating it let me know.
http://forum.club8090.co.uk/viewtopic.php?f=37&t=87097
Cheers,
MM
http://forum.club8090.co.uk/viewtopic.php?f=37&t=87097
Cheers,
MM
'89 Autosleeper Trident
2.1 DJ
Member 9111
2.1 DJ
Member 9111
-
- Registered user
- Posts: 2673
- Joined: 03 Apr 2007, 12:54
- 80-90 Mem No: 8386
- Location: Nottingham
Re: Topics required to be put in the T25 Tech Wikipedia
HarryMann wrote:Yes, those are good pics and a very good guide - to be put in the Wiki then
Alternative steering wheel thread.....good for those with power steering otherwise the steering will be far too heavy.
but I think you have misquoted yourself there somehow? What are you sayimg may be making the steering too heavy, not changing the steering wheel to a smaller one ?
HarryMan, no miss quote......As a MK1 steering wheel is smaller than the original it has less leverage. I would only recommend the swap to this wheel if the van has power steering or the driver felt the increased steering wheel effort wouldn't be a problem for them.
Martin
1989 California 2.1MV
Re: Topics required to be put in the T25 Tech Wikipedia
Ah, cheers, I read it the other way a round, OOps!
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
Re: Topics required to be put in the T25 Tech Wikipedia
Harryman I have written up a guide for converting round headlights to square below. The pictures will need adding to the wiki too as I cannot guarantee the links will continue to work forever.
------------------------------------------------------------------------------------------------------
CONVERT ROUND HEADLIGHT TO SQUARE
Converting round candle lights to modern and cool looking square lights is pretty straight forward. I did mine the other week in about an hour.
Firstly I bought the correct lower mounting brackets (seen in the next picture below) from VW 255-853-647 x 2
(Now available again from http://www.brickwerks.co.uk/shop?page=s ... gory_id=57" onclick="window.open(this.href);return false;)
Firstly to fit the square light units you need to gently bend back the two outer mountings on the Van with a hide mallet or something. Not quite 90 degrees back should do it (that way you can bend them back if you ever go back to round headlights). They get in the way of the square light assemblies and you don't need them for the square grill as the grill fixes to the square light units.
SEE PICTURES BELOW
Next you need to drill holes to take the new headlights. (reference picture below)
Firstly screw the mounting bracket you got from Brickwerks to the headlight unit. They go on the lower inner corners.
Now attatch the square headlights to the van using the two existing outer screw holes from the round light setup.
Then drill the holes for the mounting bracket and the lower inner fixing point on the other side
Screw the mounting tabs to the body (I used rivets but the brickwerks kit comes with sefl tapping screws). Again watch the paintwork.
Now I am assuming you got the wiring loom pigtails with the headlights?
Leave your existing side light wires alone you can use these
Snip off your existing headlight connectors about 3 inches back from the plastic connector block
Now solder and heat-shrink the wiring looms you got with the square headlights to your existing loom matching up the wire colours on each side. Ignore the side light block on the loom. Tie wrap this up neatly out of the way and maybe tape up the socket to prevent any water getting in.
Fit headlights to body remembering to plug them in first.
Attach the square grill
Stand back and admire your new modern lights
Take van to local MOT tester to get the light beams checked/adjusted
------------------------------------------------------------------------------------------------------
CONVERT ROUND HEADLIGHT TO SQUARE
Converting round candle lights to modern and cool looking square lights is pretty straight forward. I did mine the other week in about an hour.
Firstly I bought the correct lower mounting brackets (seen in the next picture below) from VW 255-853-647 x 2
(Now available again from http://www.brickwerks.co.uk/shop?page=s ... gory_id=57" onclick="window.open(this.href);return false;)
Firstly to fit the square light units you need to gently bend back the two outer mountings on the Van with a hide mallet or something. Not quite 90 degrees back should do it (that way you can bend them back if you ever go back to round headlights). They get in the way of the square light assemblies and you don't need them for the square grill as the grill fixes to the square light units.
SEE PICTURES BELOW
Next you need to drill holes to take the new headlights. (reference picture below)
Firstly screw the mounting bracket you got from Brickwerks to the headlight unit. They go on the lower inner corners.
Now attatch the square headlights to the van using the two existing outer screw holes from the round light setup.
Then drill the holes for the mounting bracket and the lower inner fixing point on the other side
Screw the mounting tabs to the body (I used rivets but the brickwerks kit comes with sefl tapping screws). Again watch the paintwork.
Now I am assuming you got the wiring loom pigtails with the headlights?
Leave your existing side light wires alone you can use these
Snip off your existing headlight connectors about 3 inches back from the plastic connector block
Now solder and heat-shrink the wiring looms you got with the square headlights to your existing loom matching up the wire colours on each side. Ignore the side light block on the loom. Tie wrap this up neatly out of the way and maybe tape up the socket to prevent any water getting in.
Fit headlights to body remembering to plug them in first.
Attach the square grill
Stand back and admire your new modern lights
Take van to local MOT tester to get the light beams checked/adjusted
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Re: Topics required to be put in the T25 Tech Wikipedia
Added Cruz: http://wiki.club8090.co.uk/index.php/VW ... _To_Square" onclick="window.open(this.href);return false; Many thanks
Will try to do a few others to ease the backlog we sometimes get. Agree on waterjacket explanation - tis a good one so that will be in shortly too. Its rather easy to destroy the WIKI which is why only a few do it. Just bear with us and they will all appear in time.
Will try to do a few others to ease the backlog we sometimes get. Agree on waterjacket explanation - tis a good one so that will be in shortly too. Its rather easy to destroy the WIKI which is why only a few do it. Just bear with us and they will all appear in time.
Roller paint your camper at home: http://roller.epizy.com/55554/" onclick="window.open(this.href);return false; for MP4 download.
Re: Topics required to be put in the T25 Tech Wikipedia
Thankyou Ralph, much appreciated; have been getting behind (being a laggard), with one or two excuses as always
Hope you don't mind if I cast my eye over and do an final tidying/edits, cheers!
Hope you don't mind if I cast my eye over and do an final tidying/edits, cheers!
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
-
- Registered user
- Posts: 25
- Joined: 05 May 2010, 23:38
- 80-90 Mem No: 8244
- Location: Kingsley, Hampshire
Re: Topics required to be put in the T25 Tech Wikipedia
In the Garage General Section -
Suffolk - Coltec racing engines.
Richard Coles
The Garage
The Street
Hollesley
Woodbridge
Suffolk IP12 3QU
Tel: 01394 410284
Fax:
http://www.coltecracing.com" onclick="window.open(this.href);return false;
Email: richard @ coltecracing.com
Our waterpump went on our 1.9 DG engine when we were on holiday here and Richard did a great job of replacing it . We were lucky we happened to be staying on a lovely campsite 5 mins from his garage as he was probably the only mechanic in the area that would replace the pump and it saved us a tow home. Really nice chap too.
Janine.
Suffolk - Coltec racing engines.
Richard Coles
The Garage
The Street
Hollesley
Woodbridge
Suffolk IP12 3QU
Tel: 01394 410284
Fax:
http://www.coltecracing.com" onclick="window.open(this.href);return false;
Email: richard @ coltecracing.com
Our waterpump went on our 1.9 DG engine when we were on holiday here and Richard did a great job of replacing it . We were lucky we happened to be staying on a lovely campsite 5 mins from his garage as he was probably the only mechanic in the area that would replace the pump and it saved us a tow home. Really nice chap too.
Janine.
Kenny the Camper
1984 1.9 DG Petrol
1984 1.9 DG Petrol
Re: Topics required to be put in the T25 Tech Wikipedia
The 80-90 Tech Wikipedia Your 1st port of call
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
Re: Topics required to be put in the T25 Tech Wikipedia
Steering Column Bushes and Steering Coupling
Over time the rubber tophat steering column bushes (the area where the column splits in an accident) become oval giving excess play in the steering without anything happening at the wheels. Not good in winds.
Here is a sad video I made http://www.youtube.com/watch?v=a37rRKQo0fk" onclick="window.open(this.href);return false;
Also the safety coupling at the base of the steering column can also degrade (there is one under the van too) and you can end up with no steering. See mine in the picture below!!
Steering column bushes available from JK http://www.justkampers.com/shop/steerin ... 10271.html" onclick="window.open(this.href);return false;
or http://www.brickwerks.co.uk/index.php/b ... 3-all.html" onclick="window.open(this.href);return false;
And Coupling from Brickwerks http://www.brickwerks.co.uk/index.php/r ... iltis.html" onclick="window.open(this.href);return false;
I have attached some images
First is the new bushes (2 per van) and coupling
Second is where they fit on the van
Third is the old knackered coupling I removed
It's pretty straight forward thing to fix. Just make sure you mark the positions on the spline when dismantling the column so you get it back in the same place.
Over time the rubber tophat steering column bushes (the area where the column splits in an accident) become oval giving excess play in the steering without anything happening at the wheels. Not good in winds.
Here is a sad video I made http://www.youtube.com/watch?v=a37rRKQo0fk" onclick="window.open(this.href);return false;
Also the safety coupling at the base of the steering column can also degrade (there is one under the van too) and you can end up with no steering. See mine in the picture below!!
Steering column bushes available from JK http://www.justkampers.com/shop/steerin ... 10271.html" onclick="window.open(this.href);return false;
or http://www.brickwerks.co.uk/index.php/b ... 3-all.html" onclick="window.open(this.href);return false;
And Coupling from Brickwerks http://www.brickwerks.co.uk/index.php/r ... iltis.html" onclick="window.open(this.href);return false;
I have attached some images
First is the new bushes (2 per van) and coupling
Second is where they fit on the van
Third is the old knackered coupling I removed
It's pretty straight forward thing to fix. Just make sure you mark the positions on the spline when dismantling the column so you get it back in the same place.
- Attachments
-
- DSCF0367.jpg (39.56 KiB) Viewed 74523 times
-
- DSCF0368.jpg (50.29 KiB) Viewed 74523 times
-
- DSCF0385.jpg (40.5 KiB) Viewed 74523 times
Last edited by Cruz on 12 Sep 2013, 09:47, edited 3 times in total.