Page 1 of 1
Propex heating electrics need person in leeds area
Posted: 24 Sep 2009, 19:21
by simonrwilson
Help ! I bought a 1990 T25 last year and I cannot get the propex compat 1600w to work. I think thermostat and wiring need checking. can anyone advise someone in the leeds area. thanks in advance simon
Re: Propex heating electrics need person in leeds area
Posted: 24 Sep 2009, 20:02
by kentishvanman
Why not give Propex a ring. I gather they are quite helpful.
Don
Re: Propex heating electrics need person in leeds area
Posted: 24 Sep 2009, 21:10
by nindy
Do a search on the net for propex's number and call them , they are very helpful even if you haven't bought it off them !! They aslo do the parts if you need them !!
Re: Propex heating electrics need person in leeds area
Posted: 25 Sep 2009, 08:07
by Rincewind
theres Steve at Gasure too, albeit in Chester
he's fitting mine, and authorised dealer i believe...
Re: Propex heating electrics need person in leeds area
Posted: 25 Sep 2009, 12:40
by quagmire
simon,before you go any further,undo the fuse for the propex.look inside the propex(through the vents)so you can see the fan.ok? get a long handled screwdriver and gently move it left or right.if it moves freely(spins like a hamster wheel) it is probably an electrical problem.if it doesn't budge then the fan has stuck on.you will need to remove the propex,undo it (about 6 screws)and grease the base of the fan in wd40 moving the fan all the time back and forth.it will eventually work free! this was the advice i was given by the good man at propex.worked for me and the campcharlies.good luck mate
