Club 80-90 Forums

Hi,
Does anybody know of a source for cupboard handles that would replace the ones on my 1988 Autosleeper.
They are the sliding latch type that fit into a 2''dia hole in the door.
Don

If you ever find them....

let me know

Kev,
I have sprayed the existing ones with 'Plasticote but I think it is going to come off before too long.
Don

you can get them re chromed (specialist plastic rechrome) which would last longer.
been quoted £25+ here

or use a plastic primer for a water based spray paint.

I wonder if these would fit?

http://www.bellrpg.net/grandrapidsrv/RV ... 1&GRP=2237" onclick="window.open(this.href);return false;

Mike

can u post pic of what u need pls? I got some from Bilbos, South Godstone, Surrey, a couple of years back. Old stock they no longer used....

Thanks Grun but they look as though they would would not fit in the existing hole.
Sorry fairwynds havn't had time to post a picture. You can see the type if you look at the pictures of Kev's vehicle.
Kev. Have now used a plastic primer before the plasticote and paint is sticking better. Time will tell. www.charlesandson.co.uk knew exactly the type of latch I wanted and says he has them in stock at £4-99p each. Any colour you want as long as its brown
Don

HA HA brown... yeah... right!

yes, I've toyed with a plastic primer and I do believe your on to something here.
I'm looking at an antique brass to retain the colour.
or any thing that compliments the interior.

and no

brown isn't one of them