Club 80-90 Forums

Where is the best place to get rear wheel bearings and who wants to help me change them

http://www.brickwerks.co.uk" onclick="window.open(this.href);return false;

Don't buy the chocolate ones from GSF

Pepperami

Your at the Fox and Goose, if you want a helping hand there to do them, more than willing to help, unless they want doing before, or if you want to have a relaxing time and not get your hands dirty.

Steve

Cheers chap will keep you posted on doing them at F&G. Tools will be required. My 46mm combi spanner wouldn't shift the nut.

gonna need a bigger spanner (from jaws) 46mm 3/4 drive socket and bar, and scaffold pole, dependent on lenghth not sure how many white knuckles yours needs to be tightened too, 258 or 369 lbs ft. I remember seeing on a post on this site a 46mm ring for the castleated nut which would fit into a bar, did a quick search but no luck. Might be able to get hold of a 46mm 3/4 socket and bare + pole, will know by Saturday.

Steve

Cheers fella. What ya drinking?

If Dwayne is going he has the kit, will pm him.

Found it........was a post by Rob on topic of "Top 10 things to carry",

https://club8090.co.uk/forum/viewtopic.p ... r#p7335323" onclick="window.open(this.href);return false;

also found this on the wiki
https://club8090.co.uk/wiki/Ge ... ut_spanner" onclick="window.open(this.href);return false;

Have pm'd Dwayne he has the socket and breaker bar and hopefully he he is coming.

dont forget you need a short length of scaffold pipe.oh and two fat blokes.to get the job done. you could borrow my impact spanner.but getting it to you might prove difficult.

he has the socket and breaker bar

Get Canal drifter to do it for you in exchange fer all that welding Peps

BTW you'll also be needing a new split pin, grease, a punch, hammer, workbench, handcleaner .... etc etc

Ian.

Cheers guys. I have forgotten my username for Brickwerks so can't get them from there. Where else should i try not too keen on JK either.

All sorted See you at F&G.

Looks like there will be enough tools to do the job, I will bring along some gaffer tape in case we can't find 2 fat blokes, we can tape 2 thin ones together,or 3 if need be. I will bring an old washing up bowl and some hand cleaner, and a lot of paper towels for drying hands or cleaning the parts, any thing else needed, put a list up pepperami

Steve