Club 80-90 Forums

Just going over a couple of things on my camper and i noticed the washer jets weren t working, thought it would be a easy fix......just add water.

I started adding the water and noticed water was coming out, from the washer bottle area, thinking the water bottle may of had a crack in it i took it off and it appeared fine with all cables connected to it, whilst it was out i refilled it and tried squirting again, i could hear it all working but then noticed water was leaking by my gear stick.................so i reckon one of the washer jet pipes may of come off but it looks like a nighmare to try and trace.

Any help please would be as ever gratefully received.

Jutstar wrote:.................so i reckon one of the washer jet pipes may of come off but it looks like a nighmare to try and trace.

.

It is.
Take off the jet and try and fish the pipe up to the hole.

Might be an idea to read through this thread

https://club8090.co.uk/forum/viewtopic.p ... s#p7317801" onclick="window.open(this.href);return false;

Some good advice on removing the jets (from 'phade') at the end of page 1

Mike

Lovely job, thanks guys i will have a go in the light tommorow. Thanks again.

So it wasn't leaking until the washer bottle was topped up? tis the seal betwix filler neck and bottle body. Mine leaked when I first got it, used a suitable mastic sealer etc.
Martin