Club 80-90 Forums

Posted: **24 Feb 2006, 14:29**

Just finish fitting intermittent front wipers to my early van.

Click this for the guide

Posted: **24 Feb 2006, 14:57**

top potatoe .. i'll do mine now i've seen yours

Posted: **24 Feb 2006, 23:33**

Top man...........
lhd................................

Posted: **25 Feb 2006, 09:49**

Well done Shaun, good write up.

Posted: **25 Feb 2006, 14:42**

This needs to be in the wiki - if someone tchnical is available....
(not I)
Emma

Posted: **25 Feb 2006, 15:44**

This is a great mod, I'll be doing mine before it goes back on the road.

Thanks a lot.

Tex R

Posted: **25 Feb 2006, 15:55**

Er, scotch blocks?!
You mean solder and insulate surely!

Posted: **25 Feb 2006, 19:15**

When I say scotch blocks I meant 3M Scotch-lok wire splicers from maplins which I then wrapped in insulated tape for extra protection. Not as good as solder and insulation but there you go

Simon is right and solder insulated with heat shrink is the proper way to do it and I should have shown that on the diagram. It has been ammended to show that. Best to advise the proper way to do things

Posted: **25 Feb 2006, 19:36**

ermie571 wrote:This needs to be in the wiki - if someone tchnical is available....
(not I)
Emma

The link is in the wiki twice the intermittent wiper sections

Posted: **25 Feb 2006, 23:10**

Nice one fella, another one for the list.

Cheers

Posted: **25 Feb 2006, 23:49**

matt put it on the wiki ages ago i think.

jed

Posted: **26 Feb 2006, 00:26**

jed the spread wrote:matt put it on the wiki ages ago i think.

jed

That was only applicable to late blade fuse vans where the wiring was installed but the relay ommitted

Needed to wire it in my early van whilst it only took me a minute to do kathyshacks later van

Posted: **26 Feb 2006, 00:36**

Nice one Horace...

BUT (sorry)

It's not IN the Wiki, its linked to the Wiki..

If we don't ensure this sort of vital stuff in not only in there but embedded on our server, then in a couple of years time, as eggs are eggs, half the stuff in Wiki will not be there, and be driving us all nuts with non-existsent links.....

Bob or myself happy to put your html up there, or you can, for posterity if you''re happy too - sure you'll agree it is too much work writing this stuff to let ntlworld or a changed account let it dissappear one day

NB. Have changed the title (but not Wiki link) to clarify which article is which (blade fuse wise) and your embedded link to the other article is broken, so needs changing to:-
http://www.keithandsylvia.co.uk/tech%20 ... wipers.htm, at least for the time being.

Also differentiated Main Page links for Early/Late vans..

Rgds

Posted: **26 Feb 2006, 02:38**

Horace, nicked your source code and made an attempt at getting it embedded up on Wiki - hope that's OK

Ditto embedded images

T'wasn't fun

bit more tidying of this whole subject needed, like adding the very late, straight relay job as No. 3

Posted: **26 Feb 2006, 08:48**

Cheers Harry

I've added this too http://www.club80-90.co.uk/wiki/index.p ... re_battery

Club 80-90 Forums

Fitted intermittent front wipers to an early van

Fitted intermittent front wipers to an early van

Intemittant wipers

Fitted intermittent front wipers to an early van