Page 1 of 1
gear change problems
Posted: 03 Mar 2008, 17:51
by Valedub
Went a run to North Wales Sunday by heck it was cold.
tried to back it in the drive, poor selectionon gears!!!!!!! can't find reverse without a fight and stiff movement on the rest of the gears.
Any ideas?
Thanks for any help.
Posted: 03 Mar 2008, 18:03
by plurker
.
gear change problems
Posted: 03 Mar 2008, 18:32
by meggles
What van? Mine's a 2.0 A/C and I had similar problem.. Turned out to be linkage at gearbox end. Nylon bushes had flats on them. tightend up squareish bracket which they sit in and a good greasing did the trick. Did a more complicated repair before that but the above is worth a try first!
Good Luck
Posted: 03 Mar 2008, 20:03
by redstar
sounds like play/over extension of the rear onion....
i had some thing like that, but mine turned out to be one of the bushes on the front.... twas missing! i found that by looking at the linkage at the front and looking at the play onto the shaft... good luck..
Posted: 04 Mar 2008, 12:16
by Uncle Nick
I've a Type 2 Bay (still looking for a Syncro) and know your van could be different, but I had similar problems that turned out to be a stretched clutch cable and a £5 fix!
