Page 1 of 1
MOT
Posted: 27 Feb 2008, 13:55
by jaylo264
Hi, does anyone know , is the condition of the sills on a t25 important for the mot ? i.e. they are rust coloured , but can`t yet see any holes in them. Underside is generally solid .
Jaylo
Posted: 27 Feb 2008, 14:32
by clartsonly
I was informed mine was a good example, and I accidently jacked the back up without inserting the jack fully and cracked some of the rust off from around the sills.
Re: MOT
Posted: 27 Feb 2008, 17:22
by Bowton Lad
jaylo264 wrote:Hi, does anyone know , is the condition of the sills on a t25 important for the mot ? i.e. they are rust coloured , but can`t yet see any holes in them.
The rust colour will attract the attention of the MOT tester who will then start prodding around with a screwdriver. If the tester finds any excessive corrosion within a ''proscribed are'' ie. 30cm of any suspension component/seat belt mounting then the vehicle will fail the test.
