Club 80-90 Forums

havin trouble with eber.when taking out black box which i think is inverter noticed smaller of two leads on back is cut with two white wires sticking out.does any one know what these are for ?also there is a brown connector coming up beside silver box with a blue wire and brown wire.
should these wires be joined to the two white wires?
could this be why my eber aint working.[/img]

I think the two white wires should run to a resetable over-temperature switch at the end of the unit. If the two wires are joined this will simulate a 'reset' switch, which is the normal for running. If yours are apart or not connected then try joining them first and if this works try to get hold of a new switch. It should have a little red button on top of it which you can push to reset if an overheat condition occurs.