Page 1 of 1
any one with a blue bird custom r&r bed ??????
Posted: 24 Nov 2007, 13:45
by jamesc76
i got a brand new blue bird customs rock and roll bed of ebay last week and was wondering do you have to build up the height of the base over the engine to make it all level, like the kit they sell at justkampers, im picking it up tommorow so just wanted to get a few ideas in my head before i start adapting things to make it all fit! Just added if any one could take some pics how it fits the instructions that came with it are for a bay!
After reading what ive put i best describe what im after, what it is i got a blue bird custom rock and roll bed frame the instructions that came with it are for a bay van so if anyone has a blue bird custom bed could they please take a few pics of how the bed bolts in cheers
james
Posted: 24 Nov 2007, 23:08
by scoobydrew
James,
Yes you will need a rear platform, when I put one in ours I phoned and asked Bluebird and they said that one would be needed.
Posted: 25 Nov 2007, 09:06
by jamesc76
cheers mate thats cool tho give's me a bit more storage space!
Posted: 26 Nov 2007, 15:10
by jamesc76
bump
Posted: 26 Nov 2007, 17:14
by Mocki
did you look at the dowloads page from the main web site?
(Club stuff>downloads)
Posted: 26 Nov 2007, 17:17
by R0B
steve those plans are not for the bluebird r&r bed....
did you look at the dowloads page from the main web site?
Posted: 26 Nov 2007, 17:23
by Mocki
your not wrong.........
but it was an excuse to point out the stuff thats there!!!!!!!!!!
Posted: 26 Nov 2007, 17:39
by Ian Hulley
Jim, the 'platform' is about 4" above the engine lid ... I'll nip out and measure it on the box-less Bus though.
Right, on our's there's 1/2" carpeted ply and then a 4" platform, which i've divided into 3 sections ... the large one pulls out and has the engine lid below it. Then there's an 'L' shape with the front part full-width with a hinged lid and a section to the left-side where I keep even more tools and tat.
I'll show you at The Doook
Ian.
Posted: 26 Nov 2007, 22:53
by jamesc76
mocki i never knew that bit of 80 90 was there!!! But it dont help wat im after is a pic of the rock and roll bed, where it bolts in etc cheers
Posted: 26 Nov 2007, 22:56
by Mocki
sorry, i misunderstood your thread, and i dont have r7r bed, so i cant take said pix....
Posted: 26 Nov 2007, 23:02
by jamesc76
no worries mate but least i no theres those downloads!
Posted: 26 Nov 2007, 23:03
by Mocki
shhhhhhhh dont tell anyone, no one reads the web page, only the forum!!
Posted: 26 Nov 2007, 23:06
by jamesc76
Posted: 27 Nov 2007, 17:48
by jamesc76
i've just tried bolting the frame i got and its defo a kit for a bay window t2 so looks like the mig welder has to come out!! So really need some pics of how the metal frame fits in before i mess it up!
Posted: 28 Nov 2007, 16:29
by jamesc76
any one please????
