Page 1 of 1
sliding door grab handle measurements
Posted: 10 Sep 2007, 12:33
by lloyd
got the grab handle, but didn't have enough sense at VF to measure where it mounts on post
Could some kind sole give me the measurement from bottom of lower sliding door track to bottom of handle?
Thanks,
Lloyd
Posted: 10 Sep 2007, 13:42
by scoobydrew
llloyd,
Ours measures 29 1/4 inches to the very bottom of the handle with the raw plugs in.
Cheers
Andy
Posted: 10 Sep 2007, 14:49
by lloyd
Thanks Andy!
That's exactly what I needed to know. I could have guessed, but figured VW took a little time figuring out what was best placement.
Lloyd
Posted: 10 Sep 2007, 15:28
by Cruz
Sliding door grab handle? never heard of one of those. Were do they fit and what's the benefit?
Posted: 10 Sep 2007, 17:48
by T3teedub
This may be an extra handle fitted to the inner door ?? to help closing the door without slamming. I fitted one in both my Bays but not felt the need in the T3.
Posted: 10 Sep 2007, 17:58
by lloyd
handle on pillar between front door and sliding door.. To help gimps in and out
Posted: 10 Sep 2007, 19:25
by T3teedub
Ah, right.
Posted: 11 Sep 2007, 08:10
by shepster
T3teedub wrote:This may be an extra handle fitted to the inner door ?? to help closing the door without slamming. I fitted one in both my Bays but not felt the need in the T3.
Obviously not got an early slider then!
Posted: 11 Sep 2007, 08:28
by Cruz
Too right. My early slider wakes up the entire campsite and makes all the roosting crows fly away every time it's closed
