Page 1 of 1
manifolds and linkage etc
Posted: 17 Jul 2007, 11:31
by jonnyshowbiz
Hi,
I have ordered my carbs, dells 40's
an need to get some manifolds linkage, air filters suggestions ??
Posted: 20 Jul 2007, 19:12
by west E
got mine from vw speedshop. Make sure you tell him it's for t25 and he will send you smaller air filters 1.5".
cheers
ian
Posted: 20 Jul 2007, 19:23
by west E
oops,
forgot to say if you ask him he will have the hole's put in the vaccuum bose's in each manifold and supply em for an extra twenty quidish, if you dont you'll have no brakes!!. Buy the dellorto superperformance tech book, and an anti pulse valve from
www.dellorto.co.uk.
cheers
ian
Posted: 21 Jul 2007, 07:34
by jason k
agree!!!
but as a point of note, both myself and stretch dont run an anti pulse valve and have no side effects.
jim at stateside tuning sells the fannymoulds and linkages too
Lining
Posted: 21 Jul 2007, 20:55
by silverfoxfintry
I lined my hi-top with an voil/bubble-wrap/foil sandwich and then corded carpet.
It was stuck on with spray glue.
It made some diference to the heat.
Re: Lining
Posted: 22 Jul 2007, 10:55
by jason k
silverfoxfintry wrote:I lined my hi-top with an voil/bubble-wrap/foil sandwich and then corded carpet.
It was stuck on with spray glue.
It made some diference to the heat.
erm .................
wrong thread i think chap!!!!!!
