Page 1 of 1
connecting speakers up
Posted: 27 Apr 2007, 06:37
by donkey
Hi,
Can anyone tell me how you feed speaker cable from under the dash through into the door.
I can not see a hole where it feeds through so it has got me stumped!!
Any suggestions?????????
Thanks Steve...
Posted: 27 Apr 2007, 10:26
by andygti39
the proper way would be to drill a hole in the door and shell then insert a rubber grommet in the holes then thread the wires through.
but getting a drill in is a problem without removing the door
in gonna be putting speakers in my doors this weekend so i'll way it up then and let you know
Posted: 28 Apr 2007, 13:46
by owlets
Where did you end up putting the wires? I've just fitted the speakers to my door cards, but not sure where to put the wires either.
Posted: 28 Apr 2007, 13:54
by hembo666
whoever fitted mine just ran the in under the bottom corner of the door card
Posted: 28 Apr 2007, 14:22
by owlets
hembo666 wrote:whoever fitted mine just ran the in under the bottom corner of the door card
ANd then under the carpet?
Posted: 28 Apr 2007, 15:15
by hembo666
yep, out the cornor of the door card, under the carpet and up into the dash. looks crap and i have to keep threading the access back in every so often but it works.
The way Mocki suggested would be the way to do the job properly, thats how its done in all cars with door speakers
Posted: 28 Apr 2007, 16:53
by owlets
what way did mocki suggest?
connecting speakers up
Posted: 29 Apr 2007, 23:29
by Bowton Lad
andygti39 wrote:the proper way would be to drill a hole in the door and shell then insert a rubber grommet in the holes then thread the wires through.
but getting a drill in is a problem without removing the door
Flexible drive thingy for your electric drill.
Posted: 30 Apr 2007, 06:40
by donkey
I have sorted the problem. I have took some pictures and will post them later.