Page 1 of 1

starter motor refusing to pull off....

Posted: 26 Feb 2026, 16:12
by Seana
T25 1986 2.1 petrol.

Undone the bolts... eventually...
Disconnected all the wires....

The starter motor moves freely but I cannot pull it out of the engine.. it feels like something is stuck.

Any ideas?
I'm under the van right now so any help greatfully received.

Thanks all.

Re: starter motor refusing to pull off....

Posted: 28 Feb 2026, 09:49
by maxstu
Still waiting under van for reply... :)

Manual or auto?
If manual, the bendix or pinion (the bit that engages with flywheel) may well have jammed open and stuck against flywheel.
Put a 30mm spanner on crank pulley and rock engine back and forth a little.
Or grab a large hammer and place a piece of wood against starter body and give it a bash.

Re: starter motor refusing to pull off....

Posted: 28 Feb 2026, 19:00
by Stesaw
Give it a few taps with a rubber mallet

Re: starter motor refusing to pull off....

Posted: 28 Feb 2026, 19:24
by maxstu
Stesaw wrote: 28 Feb 2026, 19:00 Give it a few taps with a rubber mallet


Give what a few taps with a rubber mallet? :rofl

Re: starter motor refusing to pull off....

Posted: 03 Mar 2026, 00:19
by Stesaw
Thats the secret.. :wink:
The starter of course