Page 1 of 1
Oil breather leak
Posted: 24 Apr 2022, 07:17
by stus
Hi all. My 84 dg is leaking oil from base of breather tower. Should there be a gasket on there? Or does it have an o ring? Can’t make out if it does have an o ring and whether it’s gone hard
Any help much appreciated!
Thanks
Oil breather leak
Posted: 24 Apr 2022, 07:55
by DoubleOSeven
Yeah should have an O-ring N90106101 and there should be 2 washers on each stud, flat & spring, but don’t over tighten the nut, it only needs 8Nm torque.
Re: Oil breather leak
Posted: 24 Apr 2022, 08:01
by ZsZ
It should have an O-ring:
Partnr is N90106101
Victor Reinz equivalent partnr: 40-76151-00
63x4mm
E D I T: I was slow...
Re: Oil breather leak
Posted: 24 Apr 2022, 14:22
by Aidan
63mm x 4mm nitrile
