Club 80-90 Forums

Gone and snapped my speedo needle. Apart from gluing (it's brittle and in 3 parts now) what's my options guys ?

Depends which bit is broken for glueing it (and finding the right glue, but new ones are pretty heap

https://www.brickwerks.co.uk/t3-parts/c ... ables.html" onclick="window.open(this.href);return false;

And this might be useful?

https://club8090.co.uk/wiki/Wh ... eter_Cable" onclick="window.open(this.href);return false;

There is no needle on that link..

Depends which bit is broken for glueing it (and finding the right glue, but new ones are pretty heap

He has a broken needle not cable..

And this might be useful?

Stupid me, too tired to read properly.

I made a new needle by sculpting the spine of a plastic disposable knife. A little dab of epoxy to bed it in...

Sent from my SM-G920F using Tapatalk

Hi I also broke my needle and made one from a plastic knive but it's never worked properly since so use an app on my phone which I fined great

Glue it and sand it.


Sent from my iPhone using Tapatalk Pro

https://www.ebay.co.uk/sch/i.html?_from ... e&_sacat=0" onclick="window.open(this.href);return false;

Take pot luck.

Or get one printed? https://www.thingiverse.com/thing:2527039" onclick="window.open(this.href);return false;

In both cases, shaft diameter will be important to ascertain.

One of these - https://formlabs.com/3d-printers/form-2/" onclick="window.open(this.href);return false; about 4 feet away from me at the moment.....

Thanks for suggestions folks.
From a plastic knife to 3D printing. I'm trying the knife first

Hi can you post how you get on with the plastic knife please I'd like to know why mine is all over the place cheers

Mine is accurate up to 50mph. When it reads 70 on the gauge, its actually more like 65.

Sent from my GT-I9195 using Tapatalk