Page 1 of 1
leaky autohomes Kamper roof
Posted: 10 Feb 2007, 11:14
by scooterdoc
My roof hasn't let a drop in ever, now it seems to pour in, any tips on the likely culprits? There seems to be some coming in around the skylight, but it looks like the whole front half is soaking it up
Any pointers gratefully appreciated
Posted: 11 Feb 2007, 13:21
by phade
Skylight for definate. That's the same problem I've had with my autohomes hightop campervan.
Replace the seal on the poptop and see if it still leaks first.
Strip out the carpet, beds and wooden bed frames in the roof and let them dry out completely.
After you have stripped out the roof interior, check everywhere inside the roof for rust, etc. Use a fan heater to dry out the roof (which takes ages).
Also check the sealant around the skylight and at the bottom of the roof. If it looks knackered (like mine does) then get the old sealer off and reseal it. Do this after the weather has been dry for a few days.
Use white PU seal to reseal the skylight and roof. Always use very old clothes and gloves when dealing with PU seal and use strips of cardboard as a tool to force the sealer inwards as quickly as possible. PU seal hardens fairly quickly (approx 20 minutes).
The only thing I don't know at the moment is how to separate the hightop from the rest of the campervan.
If PU seal does get onto your skin, then immediately wash it out with swarfega/washing up liquid and hot water. If left for more than 1/4 hour it won't come off your skin at all, even with a knife.
I hope this helps.
Posted: 11 Feb 2007, 18:44
by scooterdoc
Just spent a while on the roof, skylight seal gone, as I don't currently have one, I've resealed it with clear silicone. I'm foing to make a new seal and then refit it when it's a bit drier, but at least it'll stop it for now.
Thanks for the pointers

Posted: 11 Feb 2007, 20:11
by phade
Silicone sealant is a big no no !!! It will work for a very short period of time.
I would replace that with PU seal as soon and as quickly as possible !!