Club 80-90 Forums

Didn't want to hijack the other recent thread, but...

I got the 99 thing for my wipers to, and the bleeding headlight buzzer doesn't work every time. Totally frustrating!! It does buzz if I flip the wiper when the lights are on and ignition off, and occasionally if I don't flip the wiper.

Any wiring geniuses able to help me out?

I had the same problem never sorted it gave up in the end. Hard wired a buzzer in.

Not seen it the electrical schematics but I guess it should buzz when the doors are opened. If so I'd check the door switches Inc any on sliding door and tailgate.

Mine buzzes with the doors closed.

I probably need to spend a while with a wiring diagram, and find out how to create a bridge that fools the buzzer into thinking the wipers are on, without the wipers actually being on (if you know what I mean). My buzzer ALWAYS buzzes when the ignition is off, the lights are on and the wiper switch is activated.

Next job on the list;
https://www.youtube.com/watch?v=kwXX9eoAQ4c" onclick="window.open(this.href);return false;

Did you remember to remove the white pin from your wiper stalk,as you wont get variable intermittent wipers if you didn't..

I got the 99 thing for my wipers to

No white pin, I already had intermittent wipers... off work over Easter so might have time to peruse the wiring diagram...