Page 1 of 1
Sump plug length
Posted: 19 Jun 2016, 16:07
by captain Byrne
Anyone know how long is too long for a sump plug? Had to tap my sump and bought a plug which is 25mm long, (measuring from washer to tip of plug). A tad worried as it's quite a bit longer than the original.
Re: Sump plug length
Posted: 19 Jun 2016, 19:38
by itchyfeet
Interesting question, I was once worried the swing of the crank could come close to the sump plug when using a wheel bolt as a temporary sump plug ( I lost mine, it's worth noting the same thread
) but in reality the crank is above the cam and the cam is miles away from the sump plug.
Sent from my sofa trying not to watch Vera ( Abbot ale on the go)
Re: Sump plug length
Posted: 19 Jun 2016, 19:54
by captain Byrne
Cheers Itchyfeet - room in there for a double decker.
(also trying not to watch Vera but with a glass of the old red French stuff)
