Page 1 of 1

Sliding window identity?

Posted: 10 Jun 2016, 11:11
by volks_womble
I bought this window a while ago which was labelled as a t25 item with the intention of either replacing our damaged one, our using it in the sliding door:

Image

However when I compare it to the sliding window in our van, it is the same height, but about 30mm shorter on the length.

Our van is an autohomes conversion, which I believe were supplied with factory windows, so is this other window one for a converted panel van, or for a later design?

The glass in the window is etched with a VW logo, which is why I thought it was a factory window...

Any idea what it is for?

Thanks
Mark

Re: Sliding window identity?

Posted: 10 Jun 2016, 12:25
by Mk2Tony
It looks the same as what I have in my Devon conversion, in the sliding door

Tony

Re: Sliding window identity?

Posted: 10 Jun 2016, 14:20
by multisi
Most british T25 camper converters used panel vans without factory windows, just cut their own in. That slider window is from a sliding door on a right hand drive factory fitted window van.

Re: Sliding window identity?

Posted: 10 Jun 2016, 14:54
by volks_womble
For some reason, I thought that Autohomes conversions were factory fitted windows.

Ours is a Mk1 Autohomes Kamper with the VW 'Camping' badge on the rear.

A sliding window for a RHD van is precisely what I wanted, but it looks like my aperture is too long (albeit spot on for height).

Look out for a sliding window in the for sale section soon...

Thanks
Mark

Re: Sliding window identity?

Posted: 10 Jun 2016, 15:07
by multisi
There is also an early or late size for the window on a sliding door.

Re: Sliding window identity?

Posted: 10 Jun 2016, 15:20
by volks_womble
Ah, that would make sense. The window definitely looks late, but ours is certainly an early van...

Thanks
Mark

Re: Sliding window identity?

Posted: 11 Jun 2016, 20:02
by bigherb
Early vans to 1985 the sliding door window is 1082mm long, post 1985 they are 1052mm

Re: Sliding window identity?

Posted: 14 Jul 2016, 21:50
by rockthebus
volks_womble wrote:I bought this window a while ago which was labelled as a t25 item with the intention of either replacing our damaged one, our using it in the sliding door:

Image

However when I compare it to the sliding window in our van, it is the same height, but about 30mm shorter on the length.

Our van is an autohomes conversion, which I believe were supplied with factory windows, so is this other window one for a converted panel van, or for a later design?

The glass in the window is etched with a VW logo, which is why I thought it was a factory window...

Any idea what it is for?

Thanks
Mark

So is this window for a late bus, with factory fitted windows?