Club 80-90 Forums

Hi can u modifi electric mirrors so that lhd ones will fit on the rhd if so how do u do it please

I'd also be interested in how this is done.

I understand that the only difference between LHD and RHD is the position of the detent in the door mounted foot.
If you remove the mirror and unbolt the body on both you will see it.
IIRC it is a matter of putting a new drill dimple in each foot, copying left to right and vice versa.

Sent by Morse code from the bunker

Thanks I will give it a go

Wont work if you switch the mounts? left to right?

Dont know! I have an odd "pair" of lhd ones (I think...) so I could compare them to the rhd bus.

Sent by Morse code from the bunker

silverbullet wrote:Dont know! I have an odd "pair" of lhd ones (I think...) so I could compare them to the rhd bus.

Sent by Morse code from the bunker

Hi if u could compare them for us that would b great and do they just unscrew at the bottom

Some info here.......http://www.brick-yard.co.uk/forum/lhd-m ... 17505.html" onclick="window.open(this.href);return false;

Nice one. All you need to know right there.

Sent by Morse code from the bunker

You can remove the detent casting but then the mirror would wander. There must be a way of making another detent, I know my friend Steve did exactly this with his.

Martin

Thanks everyone for your help much appreciated