Club 80-90 Forums

Hi I notice there is a cone filter in my carb I was just wondering how you remove it so I can clean it.the cone filter is the one at the to of the crab.

Its a case of wiggling and poking, I have got an old schrieber that I ground down so I can hook it and pull, care must be taken so as not to damage it, the open end of the filter has got a lip around it and its best to use that as leverage so don't poke in too deep as you will be pulling on the mesh

thanks for the help .all i need now is the weather to play ball.

[img]//images.tapatalk-cdn.com/15/10/05 ... d4e2e1.jpg[/img]

I made a right mess of mine! Trick is, get a self tapping screw in there a couple of turns and then gently pull it out

Hi manage to get the strainer out but it got damage doing it.dose anyone know where I can get one thanks.

Brickwerks

https://www.brickwerks.co.uk/index.php/ ... l?___SID=U" onclick="window.open(this.href);return false;

thanks all sorted now.

Saw a youtube video on this recently, as above the guy used a selftapper to extract the filter

That's what i did it come out ok but it was damaged properly for the person who had the van before me.