Club 80-90 Forums

Does anybody know what the dog bone shaped things are used for on Multivan rear seat. Also are the other fixings required or can the seat just be bolted straight in?

The rubber dog bone shape things, are covers for the latches that the seat back clips into(the small white pins) when the bed is flat. Just so you don't hurt yourself on them whilst your a kip.

The square box standoffs go behind the multivan plastic side panels, the R&R hinges then bolt to them.
In brief, you need the lot.
The multivan bench/bed is about 50mm narrower than the caravelle one, which is narrower again compared to the fixed bench.