Club 80-90 Forums

Hi,

Any idea where i can get a replacement shroud? As you can see from the photo it doesn't really exist anymore

https://goo.gl/photos/Tu8RiYqkSU61H3zj7" onclick="window.open(this.href);return false;

1986 1.9 Syncro

Thanks

Scott

Sorry the photo is not the best, it was taken at the rear over the top on the silencer.

The metal sheet comes down between the silencer and water pump.

Thanks

Scott

There's one that's been advertised on eBay for £40 for months and months and months. You'll pick one up easy enough I'm sure.

You haven't stated your location.

Located in Belfast.

So is it not something you can a new replacement for?

Not sure if they are the same as 2wd
vagcat lists syncro as 251863846L and non syncro as same number but D suffix.

I made once once in under 20 minutes from sheet steel using two lengths of timber and a club hammer (all I had on site) to get the right shape, make the bends, then drill for the fixing bolts. It amazed the fella I was working with.

To be fair, its only a shield so as long as everything lines up, thats all that matters.