Page 1 of 1
Indicators not working
Posted: 16 May 2015, 07:51
by Lthomas
Light on dash on permanently but indicators not working (all) but hazards DO work- help?!
Re: Indicators not working
Posted: 16 May 2015, 08:11
by Ralf85
Remove the relay from the rear of the fuse box. Clean the connections and replace. That may cure the problem. If not, buy a replacement.
Re: Indicators not working
Posted: 16 May 2015, 08:18
by CovKid
...or if its an early van (ie bullet fuses), remove and check the relevant ones as they can look ok at a cursory glance but have a hairline crack or other damage. Often owners assume its the indicator stalk when any of the above, or a bad connection at earth crown are the cause.