Page 1 of 1
seam rust
Posted: 20 Mar 2015, 19:47
by jeffreyjon
hi all im about to start work on my first t25 wooo! starting with the seam rust whats the best way to tackle this ive bought vactan and tiger seal and primer and got all the tools so any help to get me on my way is much apprieciated thanks in advance everyone
Re: seam rust
Posted: 20 Mar 2015, 19:59
by Dazco
The only permanent method is to cut out and replace .
Other method is to dig, scrape , blast and wire brush ( not forgetting Dremnel and Stanley knife blade) as much old sealant and rust out as is physically possible .
Treat with vactan, primer , re seal , top coat.
Then repeat in 2 to 3 years.
Daz