seam rust
Moderators: User administrators, Moderators
-
jeffreyjon
- Registered user
- Posts: 5
- Joined: 09 Feb 2015, 18:47
- 80-90 Mem No: 14200
- Location: west yorks
seam rust
hi all im about to start work on my first t25 wooo! starting with the seam rust whats the best way to tackle this ive bought vactan and tiger seal and primer and got all the tools so any help to get me on my way is much apprieciated thanks in advance everyone
-
Dazco
- Registered user
- Posts: 2297
- Joined: 18 Dec 2011, 15:44
- 80-90 Mem No: 10544
- Location: Sheffield. 1984 autosleeper trooper. 1.9 petrol called Jambo
Re: seam rust
The only permanent method is to cut out and replace .
Other method is to dig, scrape , blast and wire brush ( not forgetting Dremnel and Stanley knife blade) as much old sealant and rust out as is physically possible .
Treat with vactan, primer , re seal , top coat.
Then repeat in 2 to 3 years.
Daz
Other method is to dig, scrape , blast and wire brush ( not forgetting Dremnel and Stanley knife blade) as much old sealant and rust out as is physically possible .
Treat with vactan, primer , re seal , top coat.
Then repeat in 2 to 3 years.
Daz
Auto sleeper fitted with EJ 20 subaru lump