Page 1 of 1
fitting injector pipe
Posted: 10 Nov 2006, 16:02
by gilbert
Silly question...?
Is it necessary to remove/refit all 4 injector pipes on my 1.6Td if I only want to replace No3?
Cheers
Gilbert
Posted: 10 Nov 2006, 20:44
by Simon Baxter
No, you can just do number 3 on it's own.
Make sure all the clamps are present and tight or you will keep splitting injector pipes.
Simon.
Posted: 11 Nov 2006, 08:59
by gilbert
Thank you for that. My local VW Stealership assure me that they will have to remove and refit all 4 pipes in order to fit a new No3 - at a cost of approx £150!
The little rascals...
Cheers
Gilbert
Posted: 11 Nov 2006, 20:57
by Ivorblueun
they all have their own part number on EKTA no 3 is 068 130 303D for the jx
drop the D for the KY engine