Club 80-90 Forums

Does anyone sell an aaz jx conversion hybrid flywheel ready to bolt on 228mm clutch fitment and what clutch fits
Maybe needed in the future for a planned aaz conversion but then again reading others is it really worth it for so little power gains over a jx

you just use the jx flywheel and clutch, nice and easy.

ok

Must be something up, as everyone I know used the jx set up (inc me) with no issue whatsoever.

Nothing wrong with jx flywheel and clutch on aaz. I agree Loydy.

On my 1Z conversion I used the flywheel that came with it becasuse I had a Brickwerks starter adapter to use, I used the matching Tdi pressure plate, and a 2.1dj 228mm clutch plate to match the input shaft splines

You don't need to use the Tdi starter, you can file down the nose housing slightly to clear the Tdi flywheel

So it's up to you which way you go

Rob