Page 1 of 1
Just getting foam when bleeding a VE pump
Posted: 26 Aug 2013, 09:06
by hugomonkey
im trying to start up an old van ive got standing around and i can just about start it but im getting foam from one of the injectors when im bleeding, only on one and no matter what i do i cant get rid of it, all the other are fine and where easy to bleed??
anyone throw some advice my way
Re: Just getting foam when bleeding a VE pump
Posted: 26 Aug 2013, 10:02
by ..lee..
odd its only on one jase. is the inj pipe holed ??
Re: Just getting foam when bleeding a VE pump
Posted: 26 Aug 2013, 10:30
by protexblue
Injector could be causing back pressure if dodgy or dirty.
Re: Just getting foam when bleeding a VE pump
Posted: 26 Aug 2013, 11:03
by hugomonkey
dont think so mate i can try and change it, iwas thinking that there was a bit of an air pocket in the pump as its the highest pipe that has the problem
Re: Just getting foam when bleeding a VE pump
Posted: 26 Aug 2013, 11:04
by hugomonkey
protexblue wrote:Injector could be causing back pressure if dodgy or dirty.
that wouldnt cause the foaming when im airing out though would it
