Club 80-90 Forums

One if my wiper spindles has brokenness I've got a replacement, how do. Replace them please

Is it a dash out job or is there a simpler way please

biker1981 wrote: Is it a dash out job

Yes.

i replaced the wiper motor years ago on my 1985 van , i did not take the dash out i brought the old unit out of van from behind the fuse box area just by dropping down the glovebox , cant remember what sort of job it was but its definately do able

Thanks guys... I must admit its a on I'm not looking forward to

did mine yesterday dash out fit motor and links dash back in but don't do what I did put in a screw which hold the bracket to the body which is too long it jammed the links I had to take the dash out again to find out why the motor was jamming up wont do that again for another 10 years

biker1981 wrote:Thanks guys... I must admit its a on I'm not looking forward to

I dreaded dash out for fixing my heater fan, but in the end it wasn't such a bad job if you take your time and go steady.

to take the dash out is a simple job as long as the screws are not rusted badly near windscreen due to leaking screen , and the shear of bolts holding the column undo easily enough if you chisel them undone

I did it.... 3.5 hours in total. I'm so pleased its done

biker1981 wrote:I did it.... 3.5 hours in total. I'm so pleased its done

Nicely done