Club 80-90 Forums

Evening,

I have had some Toliman alloys on my t3 for a while, even with spacers on the front the grease caps stop the centre caps fitting!

Anyone got any ideas or soloutions to extend the caps?

i bought these for mine
http://t3technique.com/lug-nuts-studs-a ... nter-caps/" onclick="window.open(this.href);return false;

wow those are expensive! lol i was thinking about getting some extension sections built lol may have to go that way

Titus on here, mentioned adapting something for pretty cheap

Daryl_C wrote:Evening,

I have had some Toliman alloys on my t3 for a while, even with spacers on the front the grease caps stop the centre caps fitting!

Anyone got any ideas or soloutions to extend the caps?

I removed about 10mm from the grease caps iirc

I used a 10mm block with a scriber and scribed a line around the grease cap on a flat surface so the line was level all the way around then I put it in a vice and hacksawed to the line. Grease caps still go on fine

I think there is something in the wiki about it

https://club8090.co.uk/wiki/Wh ... ive_wheels" onclick="window.open(this.href);return false;