Page 1 of 1

Hello

Posted: 05 Apr 2013, 18:55
by Kalendral
I'm hoping that someone out there might be able to answer a couple of questions about a g reg reg vw transporter. We've had it for approx. 10 yrs (bought 2nd hand) without any major probs but this week the flywheel has gone. Our mechanic says he can fix it but the place he gets his parts from will charge £600 (not inc. labour) He has said if we can find one online or at a breakers yard cheaper he'll fit it for us. So I'm trawling the internet trying to find a suitable flywheel & so far I've found a 100+ but I'm not sure which ones would be suitable for a g reg, or whether they're pretty much inter-changeable. If anyone has any advice on what I should be looking for, or even where to find one, it would be very gratefully received. Thanks.

Re: Hello

Posted: 05 Apr 2013, 18:59
by Mocki
Hi,
You need to tell us a bit about your van before we can answer you .......
Engine fuel type and size, transmission type and your location?

I have a flywheel sitting in my stores , if its for the right combination of engine and box .

Assuming your mechanic is correct in his diagnosis, it's not much more than a five hour job.

Re: Hello

Posted: 05 Apr 2013, 19:34
by Kalendral
It's 2100cc petrol with manual transmission. We're based in the Swindon area but could travel a short distance to pick up a part if postage isn't possible. Do you think the part you have would be suitable, if not could you let me know the details of what to look for. Thanks :

Re: Hello

Posted: 05 Apr 2013, 20:31
by Mocki
You need a flywheel that takes a 228mm clutch.
The one I have is correct,it's not new but its in Lincolnshire and would cost a horrendus amount to post .

Put a wanted advert on here in the wanted section, there are a few breakers in here .

Re: Hello

Posted: 06 Apr 2013, 00:49
by Kalendral
Thanks, will do.

Re: Hello

Posted: 06 Apr 2013, 06:43
by Jeff J
Mocki wrote:You need a flywheel that takes a 228mm clutch.
The one I have is correct,it's not new but its in Lincolnshire and would cost a horrendus amount to post .
.
If the op telephones a few of the national couriers I think they will be surprised how little it costs to pick up & deliver a parcel nowadays

Re: Hello

Posted: 06 Apr 2013, 17:41
by Thorgills
Jeff J wrote:
Mocki wrote:You need a flywheel that takes a 228mm clutch.
The one I have is correct,it's not new but its in Lincolnshire and would cost a horrendus amount to post .
.
If the op telephones a few of the national couriers I think they will be surprised how little it costs to pick up & deliver a parcel nowadays

I think if the OP put where he's located how helpful people can be at moving stuff about the country

Just noticed Swindon - sorry!

I'm going to Bristol Friday if Mocki / OP want to come to an arrangement.......

Re: Hello

Posted: 06 Apr 2013, 19:23
by Plasticman
parcell 2go £11 door to door(citylink) based on 20kg
mm
and where have you been these last 10 years...shame