Club 80-90 Forums

Hi Guys,

Any recommendations for a glue of some kind for securing the sliding door seal and tail gate? I'd like to replace it with something that secures it well enough but will allow it to be removed without damaging the seal when you do (for future renovations etc).

Cheers,
Tim.

A smear of silicone will do it

Got some sekaflex for the seams. Will that do?

Cheers,
Tim.

Evostik contact glue is the right stuff

Sikaflex/soudaflex etc. will do the job (I've done a piece on mine) but you will only be able to get it off again with a sharp knife and lots of elbow grease and you will have to hold it in place with masking tape until it cures.