Club 80-90 Forums

anyone got a link for the relay numbers and their task , (diesel)even heaven forbid a picky of fuse box,if its in the wiki then its hidden
mm

heres the stock JX http://www.syncrosport.com/wiring_diagr ... _KY_JX.pdf" onclick="window.open(this.href);return false;

a picture of mine
note the 99 variable wiper relay and "headlight left on" warning alarm (292) on far left are not standard.


edited ...

ta for that bob , its the relays id like to see detailed as to what they do and their number , for instance the relay with 19 on it.
mm

Yeah then this is the fella
http://www.syncrosport.com/wiring_diagr ... _KY_JX.pdf" onclick="window.open(this.href);return false;

so relay in position 10 marked 19 is wash wipe relay

ta bob, thats just what i was after, will print parts off, got the diagrams but couldnt find the relay layout, it dont appear in the wiki unless im blind, no dont go there, oh and is there a picky of a gearbox showing the location of the code.lol as i been asked a few times and a picky
is worth an hour of my drivvel
mm

https://club8090.co.uk/wiki/Ge ... saxle_Code" onclick="window.open(this.href);return false;

ah well the title didnt give me much clue,. thats my excuse and i am staying with it, ta i will fwd it
mm

curiouse about the relay, i dont have the luxury of wash wipe just on,1,2 so have noticed that the relay has a connector that plugs in the fuse board and then the relay slips in over it, the link joins 53m and 53s ? would this be removed if you have the stalk with the intermittent
mm

relay number 19 for intermitant wiper action

i dont have the luxury of wash wipe

I think you mean you dont have the intermittent? (all vans have wash wipe with the up selector on the stalk)
The stalks (sometimes) were made with the white plastic block that you can remove to allow the stalk to pull towards you for intermittent wipe. I think it just needs the right relay 19, there are loads out there, I may have my old one from upgrading to variable intermittent you can have if you like. I am lost on looking at that relay on the wiring, it's beyond me, but I dont think the 19 relay needs the insert. on the diagram 53s and 53m are connected together in the relays resting state anyway.

https://club8090.co.uk/wiki/VW ... ent_wipers" onclick="window.open(this.href);return false;