Sunnivagon

[LittleMissSunshine]

Quick Q - will the gas bottle slide to the right to go deeper into the cupboard? Not a problem if it won't it's just that is where our wee loo is stashed. We can make other arrangements for it if needed

[Plasticman]

thought you had a china potty that hung from a bespoke hook,will see if it can be shifted side ways,dont see why not
mm

[meggles]

Quick Q - will the gas bottle slide to the right to go deeper into the cupboard? Not a problem if it won't it's just that is where our wee loo is stashed. We can make other arrangements for it if needed

Don't drink so much wine then you won't need to go. simples

[lloydy]

thought you had a china potty that hung from a bespoke hook,will see if it can be shifted side ways,dont see why not
mm

On my autohomes both wouldn't fit, I fitted a external gas tank to enable the potty to slide in

[Plasticman]

hmm, i will measure with both the 907 and the calors and see what we end up with ,but agree that a sepperate underslung is the way to go especially if your away in winter and need plenty gas
mm

[lloydy]

From memory.. The little teeny bottle fits if wedged at a angle but even then the potty would be squashed against it. The other option for me was (other than the external tank, as some people might not want to pay the money for one) is to fit the bottle in the bottom of the rear wardrobe (it's pretty much dead space) and drill a hole for the gas pipe into the the cupboard it was in.

[LittleMissSunshine]

Mike to you need measurements of my throne? Let me know

[Plasticman]

nope cos its not going back in that cuboard, cyclinder has to be on the left, as the floor is higher on the right, due to a drop out fitting under the ply.
re routed the propex supply so its out the way but got a bit fearfull in here

a few crimped spades came away in my mit so soldered a few back on but if this is original???
new fridge vent fitted now all access is not required anymore , have applied sealing mastic strips to the rear so hopefully water wont sit there and start rust again

and the lower one cut into the new panal

mm

[lloydy]

Nothing like a nice new white vent

[LittleMissSunshine]

Not sure about the zigg being original - maybe another Komet owner may know. No worries about the throne, am sure we'll find somewhere else to stow it.

[Plasticman]

oh i think its original, just a bit bemused by the wiring and wonder if this is original or its been out and messed with ,ok the scotchlocks are added but ????? im nursing an eye patch but if i get the inclination then i may sort it
youve all summer to consider an underslung tank for next winter
and buy some dubflectas as they will really work on the van and look mint too
mm

[jeffj]

Mickey

Photos showing our zig unit and wiring. 1988 model not sure what year Helens is.

If you need any wiring diagrams making up let me know.

[LittleMissSunshine]

Cheers Jeff

[Plasticman]

ta jeff, yours is a slightly different upper console, but a copy of the wiring for this one would be a good addition to the wiki if it isnt already there,


gonna come spy your van when i get a bit of time.
mike

[Plasticman]

Well nice conversation this eve Ms S
so stevethegas was unhappy with the slider fit so was I so here you go

front bumper all sorted and new plate on order

the issues with the seal have been resolved and i will post up this sorry saga on general,so looks like screen in tomoz and thats about it till you come drag the heap away ooop north to the cold and chilly NE winds
mm