AAZ 1.9TD Overheating
Moderators: User administrators, Moderators
-
Oldiebut goodie
- Registered user
- Posts: 7484
- Joined: 18 Apr 2008, 01:19
- 80-90 Mem No: 11135
- Location: Eastern Angle
Re: AAZ 1.9TD Overheating
1.6D 2019 VW T-Cross
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
200hp VW T6
1̶Y̶ ̶1̶9̶8̶7̶ ̶H̶i̶-̶t̶o̶p̶ ̶C̶a̶r̶a̶v̶e̶l̶l̶e̶
5̶0̶8̶d̶ ̶M̶e̶r̶c̶
Re: AAZ 1.9TD Overheating
That was a 1Y that i never got around to fitting in my old van. 
Memory like a seive.
rob.
Memory like a seive.
rob.
Re: AAZ 1.9TD Overheating
Oldiebut goodie wrote:Is your engine running in reverse then?
Flat side to the pulley gives anti-clockwise rotation unless you are running in reverse! Quite simple really.
Guys please help! I'm running an AAZ from a Passat in my bus and I'm almost certain the pump came with the engine. I'm having the same woes with overheating. By your reckoning my pump should be rotating anti-clockwise but I currently have the belt going around the outside so turning clockwise like lhd. Wondering if my pump is pushing the wrong way so not cooling the engine. Does anyone know what belt size I will need to switch it round? I will probably take the pump apart to be sure, but thought I could try the switch first to see if this is the cause of my problems.
cheers,
Dan
Re: AAZ 1.9TD Overheating
How did you reverse it? Were you able to use the same belt/tensioner etc?Oldiebut goodie wrote:It won't if the pump is rotating the wrong way. I know from experience as I had an anticlockwise pump on a clockwise pulley system!!! (Done by someone else I hasten to add)