Elite Engines

Big lumps of metals and spanners.

Moderators: User administrators, Moderators

Miketaboo
Registered user
Posts: 13
Joined: 24 Jul 2009, 22:26
80-90 Mem No: 8040
Location: Ellesmere Port

Re: Elite Engines

Post by Miketaboo »

My new engine turned up today, four weeks later than they said it'd be, but the guys who are putting it in for me seem happy with it.
2.1 DJ with twin webbers, rusty seams and an owner who is useless with anything mechanical

DanO
Registered user
Posts: 105
Joined: 14 Nov 2008, 20:30
80-90 Mem No: 6872
Location: Brighton

Re: Elite Engines

Post by DanO »

over a month now and it's still at Elite.....

New Malvern had said it's not the Turbo and said to do a refurb but apparently Elite tried to save me money by refurbishing the turbo first then sending a camera down to see if oil was still by-passing - fine but they didn't say this so have offered it for free. Annoying thing is that we left a number of things in the van as we were told it was only a few weeks it would be away that we have needed while we've been back under the canvas, now it's dark in the mornings I've realised i left my bike lights in there as well. Barry at New Malvern has been very apologetic (not so great at calling me back and keeping informed though, but that's garages in my experience) and bought me a decent set of cat lights for free - customer service!!!

Hoping it will be back sometime this week........in the meantime my car has been written off by the insurance company by a "motorhomer" who reversed into it in a car park......it one way it has saved me the bother of selling :D (have been meaning to since we got the van) it but will mean I'll loose £££'s in an low estimate of it's value :cry:

DanO
Registered user
Posts: 105
Joined: 14 Nov 2008, 20:30
80-90 Mem No: 6872
Location: Brighton

Re: Elite Engines

Post by DanO »

Finally got the van back...........over two months since Elite received it.

Their communication is appauling, couldn't give my guy a straight answer and he's been using them for years. One minute the van is on it's way back, when it doesn't turn up they say oh the new heads that were cast were rubbish.............why not just give a straight answer and keep people updated???

So far the van is running well, need to take it back around 500 miles for it to be serviced again in line with the 12K/1 year warranty.

Have to say the service I recieved from Barry at New Malvern has been great. He was so apologetic for the (lack of) service from Elite that he didn't charge me for the other minor work I asked him to do.

Cafnod
Registered user
Posts: 35
Joined: 03 Sep 2009, 09:05
80-90 Mem No: 7507
Location: Hereford, Worcester, Chepstow

Re: Elite Engines

Post by Cafnod »

When the company say they recondition an engine do they give a defined schedule of work?
I know that not a lot has to be done to something to make it "reconditioned" in legal terms.
Howevr if they are fitting new pistons to +?, regrinding cranks, recutting valve seats, new valves and springs, refacing the cylinder head(s) and so on then it is a proper reconditioning.
I have fitted customer supplied engines with invoices and these have basically been steamcleaned and repainted engines out of scrappers, with new belts leads and other service consumables to make them look good.
Caveat Emptor.

User avatar
Ian Hulley
Registered user
Posts: 12661
Joined: 11 Oct 2005, 08:08
80-90 Mem No: 1323
Location: Wirksworth, Derbyshire ... or at t'mill

Re: Elite Engines

Post by Ian Hulley »

Mine had had new pistons, barrels & rings (I know this because I know who sent the engine to Elite to be rebuilt and I bought it from him rather than Elite :wink: ) and had used heads ... probably because there was nowt wrong with them. Camshafts are cheap as chips and so are bearing sets. I can't comment on the crankshaft though.

Ian.
The Hulley's Bus
1989 2.1DJ Trampspotter
LPG courtesy of Steve @ Gasure

User avatar
R0B
Moderator
Posts: 19496
Joined: 07 Oct 2005, 17:33
80-90 Mem No: 864
Location: Cheshire

Re: Elite Engines

Post by R0B »

maybe it would be best to ring them.they are more qualified to answer your question...


When the company say they recondition an engine do they give a defined schedule of work?
2.1 LPG/Petrol Auto Caravelle

"The difference between genius and stupidity is that genius has its limits"

Cafnod
Registered user
Posts: 35
Joined: 03 Sep 2009, 09:05
80-90 Mem No: 7507
Location: Hereford, Worcester, Chepstow

Re: Elite Engines

Post by Cafnod »

Just wondering Rob. Some companies say they do xy and Z, some say they do what needs doing. The latter can be worrying.

Locked